To Top
This site uses cookies to facilitate in the processing of your order. By using this website, you agree to our use of cookies.

Custom Wood and Bed Strips

CUSTOM WOOD - If you have a flat bed truck, steel bed floor or any vehicle that did not originally have a wood floor, then we can make a custom wood bed according to your specifications. Let MAR-K™ help you make the wood floor to fit your measurements. We stock oak boards for a maximum finished length of about 110 inches. Keep in mind how many boards and metal strips you need for your application and provide the measurements indicated on our bed wood data sheet below. We must know the dimensions of your bed area and the sizes of the boards to accurately design your specific application. Just fill out the bed wood data sheet below and fax, email, or mail it to us for a prompt response.

CUSTOM BED STRIPS - Good news! If you have a flat bed truck, steel bed floor, or any other vehicle that did not have a standard pattern for strips and wood, then we can make bed strips to your specifications. MAR-K™ can help you design your custom bed strips. We can supply any length strips with or without square holes according to your special pattern. Strips are 1.50" wide and can be made in any length. The flat area in the center of the strips is .70" wide, which is large enough for a 5/16 carriage bolt head. The rolled edges are .25" tall. We generally recommend approximately 12" to 15" bolt spacing to minimize distortion. When bolting strips to an existing truck bed, be sure to avoid specifying hole locations that would interfere with structure on the under side of the bed floor. Just fill out the bed strip data sheet below and fax, email, or mail it to us for a prompt response.

Please note: we do not punch round holes in bed strips. If you choose to drill your own round holes at the time of assembly, the bed strips may be attached with ribbed neck carriage bolts or other screws having a head diameter less than 3/4"

Please Select a Form from the List Below


You must have Adobe Reader 7.0 or higher in order to fill out these forms online. If you have an earlier version, you may print them out, fill in the relevant information and fax or email us a copy at info@mar-k.com. If you have an idea for a new custom part, please email us at info@mar-k.com.

Custom Bed Strips/Angle Strip Data SheetCustom Bed Wood Data Sheet

Custom Wood and Bed Strips


CUSTOM WOOD - If you have a flat bed truck, steel bed floor or any vehicle that did not originally have a wood floor, then we can make a custom wood bed according to your specifications. Let MAR-K™ help you make the wood floor to fit your measurements. We stock oak boards for a maximum finished length of about 110 inches. Keep in mind how many boards and metal strips you need for your application and provide the measurements indicated on our bed wood data sheet below. We must know the dimensions of your bed area and the sizes of the boards to accurately design your specific application. Just fill out the bed wood data sheet below and fax, email, or mail it to us for a prompt response.

CUSTOM BED STRIPS - Good news! If you have a flat bed truck, steel bed floor, or any other vehicle that did not have a standard pattern for strips and wood, then we can make bed strips to your specifications. MAR-K™ can help you design your custom bed strips. We can supply any length strips with or without square holes according to your special pattern. Strips are 1.50" wide and can be made in any length. The flat area in the center of the strips is .70" wide, which is large enough for a 5/16 carriage bolt head. The rolled edges are .25" tall. We generally recommend approximately 12" to 15" bolt spacing to minimize distortion. When bolting strips to an existing truck bed, be sure to avoid specifying hole locations that would interfere with structure on the under side of the bed floor. Just fill out the bed strip data sheet below and fax, email, or mail it to us for a prompt response.

Please note: we do not punch round holes in bed strips. If you choose to drill your own round holes at the time of assembly, the bed strips may be attached with ribbed neck carriage bolts or other screws having a head diameter less than 3/4"

Please Select a Form from the List Below


You must have Adobe Reader 7.0 or higher in order to fill out these forms online. If you have an earlier version, you may print them out, fill in the relevant information and fax or email us a copy at info@mar-k.com. If you have an idea for a new custom part, please email us at info@mar-k.com.

Custom Bed Strips/Angle Strip Data SheetCustom Bed Wood Data Sheet



Toll Free 844-MAR-K844   Local 405-721-7945   FAX 405-721-8906

Mar-K Specialized Manufacturing, Inc. 6625 W Wilshire Blvd Oklahoma City, Oklahoma 73132

©1998–2024 Mar-K Specialized Manufacturing, Inc., All Rights Reserved. Email problems with the website to webmaster@mar-k.com

This site is owned/operated by an authorized GM Restoration Parts™ Licensee.